ST-38A - 3/8 inch - Stainless Grating with Treads | Stainless Steel Grilles | Entrance Grilles & Grids | Our Complete Flooring Selection

ST-38A - 3/8 inch - Stainless Grating with Treads

The ST-38A 3/8 inch Stainless Steel Grating is a low-profile foot grille with added Carpet Treads for adding scraping and absorption and color. This 3/8 inch Stainless Steel Grating was designed to offer superior durability and striking architectural design. Uniquely, in addition to the sleek and durable stainless steel rails, ST-38A includes either a Nylon Carpet or a Polypropylene Bristle inserts at every 4-1/2″ on center. These added inserts dramatically increase the scraping and absorption capabilities of the typical stainless steel and offer the opportunity to customize the final aesthetic of the grating. The entire ST-Series is constructed with tough 304 Type Stainless Steel and is built to withstand up to 1,000 pound rolling loads and incredibly heavy traffic patterns. Stainless steel treads are spaced at .233″ on center allowing for debris scraping capabilities and safety for high-heel traffic. Specify the ST-38A 3/8 inch stainless steel grating with treads where a super durable, highly customizable high-end foot grille with a low-profile is desired.

For additional moisture and debris capacity consider the ST-58A: ST-58A 5/8″ Stainless Steel Grating.

Features & Specifications

Applications

High-Traffic Entryways, Commercial Vestibules, Corporate Office Entrances,
Sizes

Thickness: 3/8"
Length and Width: Custom fabricated to meet your specific needs.
Single Section Max: Width - 94″ / Length - 61
Features
- 3/8'' Stainless Steel Grating features a 1,000 pound rolling load.
- Stainless Steel Rails with add Rugged Treads for adding scraping and absorption
- Type 304 Stainless Steel ensures entrance system longevity
- Tread spacing is .233" providing excellent scraping ability that is safe for high-heel traffic.
- Frames available in Level Bed Cast-In Place and Level Bed Mechanically Fastened styles.
Specifications
Materials:
- Rails: ASTM A276, Stainless Steel Type 304
- Tread:
  - Carpet Fibers: 3700 denier, solution-died woven nylon with a minimum of 100, 10 mil mono-filament fibers per square inch fusion-bonded to a rigid, two-ply backing to prevent fraying, and supplied in continuous spliced-free lengths. Fibers shall be treated with anti-stain, anti-static, and anti-microbial additives.
  - Polypropylene Carpet Tread: Crimped, solution-dyed, 600 denier polypropylene fibers tufted into a woven double backing and mechanically secured to tread rails
- Support Rails: ASTM A276, Stainless Steel Type 304
- Frames: STF-38L / STF-38C - ASTM A276, Stainless Steel Type 304
Construction:
- Tread : .093" by 0.156"
- Space between rails - .233" on center
- Support Rails: 0.070", 1" on center
- Rolling Load: 1000 lbs./sqft
- Weight (Per Sqft.): Approx. 2.0 lbs.
- LEED Credits:
- MR Credit 4/5/6
- EQ Credit 4.1/4.2/4.3/5
- Please refer to the "Documents" Section for full CSI Specification and Drawings.